Ghost 2 Immobiliser Installation
The installation of the ghost 2 immobiliser is a straightforward and effective way to secure your vehicle from theft. It is directly connected to the CAN network of your vehicle and is almost undetectable.
First, you must identify an uninterrupted power source and the grounding point. It is vital to have these wires properly shielded to avoid electrical shorts.
Stops theft
The Ghost 2 Immobiliser utilizes an exclusive PIN code sequence that is created by using the existing electronic buttons on your steering wheel and centre console to ensure that only you are able to start your car. This means that even if thieves are able to steal your keys or hack into your vehicle's security systems, they will not be able to get the vehicle to move. It's also completely undetectable to anyone who tries to use it therefore you can be sure that no one will ever be aware that you've added an additional layer of security.
It also helps in preventing theft as it can shut down your car's engine even if a burglar manages to gain entry. This is achieved by utilising a secondary device called the Shadow which is connected to your car's CAN data system and does not communicate over radio frequency, making it difficult for thieves to find or tamper with. The Shadow can also be connected to your vehicle's tracking/paging system, which allows you to track its movements. It has an output which can be used to activate a siren when someone tries to steal it.
When working with wires, it is crucial to work in a space that is well-lit. This will enable you to recognize the proper wires and prevent any accidental short circuits or disconnections. It is also essential to check and double-check the connections, and to insulate the wiring to protect it from the elements. Cable ties can be used to secure wires and bundle them. This can improve their appearance and decrease the risk of them becoming disconnected when the vehicle is in use.
It's recommended to mark the CAN H and L wires using pieces of tape or labels, since misidentifying their location could lead to a power surge which damages the immobiliser. Multimeters can be used to verify that the power source and grounding points are supplying a constant 12V and a solid connection.
Easy to use
A ghost immobiliser can help you keep your vehicle safe from theft. It protects against key cloning ECU swapping and other security risks, and can be used with an iPhone application for simple monitoring and management. The app will also send alerts if your car is compromised. It can also assist you locate your vehicle in the event of theft.
The Ghost immobiliser is discreet and doesn't require any special equipment in order to function. It is connected to the CAN system of your vehicle, and is programmed with an individual PIN code. You can activate it with a series of buttons on your dashboard, steering wheel or the WeCar app. The code has to be entered to start the engine, so thieves cannot just turn on your vehicle and drive off.
Installing an immobiliser from Ghost is a straightforward process. It's important to follow the directions to ensure that your vehicle's systems are working smoothly. The first step is to disconnect the battery. This will prevent accidental airbag deployment and ensure security. It is also essential to work in a place that is well-lit to avoid making mistakes and to make precise connections. It's also crucial to use proper soldering techniques or high-quality connectors to ensure a secure and solid connection.
The CAN H wire and the CAN L wiring are needed to connect your Ghost immobiliser to the wiring in your vehicle. With a wiring diagram for your vehicle to identify these wires, locate a suitable location to connect them. It's also helpful to mark these wires with tape or labels so you can easily identify them when you install.
It's a good idea to test your immobiliser after connections have been made to ensure that it functions correctly. It's also a good idea to test the Transport Mode, which disables the Ghost system and allows you to temporarily disable your security features. This is especially helpful for situations such as transporting vehicles or for service. This feature is especially useful when you own an older vehicle that needs its battery to be isolated for service.
Low-profile
A ghost immobiliser is the ideal way to stop theft from keyless entry vehicles and vans. It works by intercepting the signal from the original remote, and creating a barrier that thieves cannot breach without the correct PIN code. It's a secure and discreet way to protect your car, and it's even suggested by insurance companies to lower monthly costs. It's a low-profile and concealed system that can be located within the buttons of your car. It does not have LED indicators, making it virtually unnoticeable to thieves.
Contrary to other security systems like unlike most security systems, the Ghost immobiliser is connected to your vehicle's CAN data network instead of the key fob. This means that thieves won't be able to detect or disable the device by wire cutting, and it's secure against tampering. This makes it more difficult to steal your vehicle, and it's also an excellent choice for older vehicles that aren't fitted with a modern keyless entry system.
The installation of a ghost immobiliser may be handled by an expert, or you can do it yourself using the right equipment and materials. You'll require basic hand tools, a multimeter to check electrical values, as well as insulation tape or cable ties to ensure that your connections are secure and well-insulated. Before you start the engine, disconnect your battery and make sure that all wiring is securely tied. This will stop thieves from tampering with the wiring.
If you're not confident in installing your own immobiliser, you can find an auto repair shop in your area to handle it for you. They'll take care of everything from the initial inspection all the way to installing the device and will offer a guarantee if something goes wrong. They'll be in a position to answer any questions you have regarding the immobiliser and assist you in deciding whether it's the right choice for your vehicle.
The Autowatch Ghost 2 is a smart immobiliser that integrates directly with the ECU of your car. This helps protect against key cloning and hacking attacks that are typical in modern vehicles. It is TASSA-certified and provides the highest level of theft protection, which means you can drive safely.
TASSA verified
The Ghost immobiliser system is one of the most effective ways to safeguard your vehicle from theft. It connects to the CAN data network of your car and prevents your engine from starting without your PIN number. The system is inaccessible to thieves and is a great alternative to an alarm for your car. You can change your PIN at anytime and only you know it. This will ensure the security of your vehicle.
Installers TASSA certified will install the Ghost system in your home or office within a few short hours. They will also provide you with owner's guides, installation documents and a free emergency card. They will also give you a thorough demonstration of the device and make sure that you are satisfied with their service before they leave.
In contrast to other immobilisers, the Ghost is able to connect directly to your vehicle's CAN data network. It can be installed without needing to cut any wires. It's also quiet, which makes it difficult for thieves to identify. The system is programmed using a a unique PIN code that you can change, which you can enter using the buttons on your dashboard and the steering wheel. This stops anyone from starting your vehicle even if they have your key fobs.
If you're ready to install a ghost 2 immobiliser first, you must begin by disconnecting the battery. This will prevent accidental airbag deployments or short circuits. Once the battery has been disconnected, you should follow the instructions in the user's manual to connect the immobiliser. Consult ghost 2 immobiliser near me to get more details specific to your particular model.
It is recommended to test the immobiliser after completing it to ensure that it's working correctly. Enter the PIN code into the vehicle and try to start it. After that, you should regularly conduct regular checks to make sure that the immobiliser is functioning correctly. This will allow you to identify any problems early so that you can address them quickly.